Printer Troubleshooting

How To Fix Faint Print For Kyocera FS-4000


Productivity and dependability in a desktop printer is an essential component for many fast-paced businesses. The new FS-4000 ECOSYS Printer offers both with output speeds of up to 47 pages per minute and an industry best 300,000 page preventive maintenance interval.

But like any gadget, printer error and issues are inevitable. Issues that are work-halting and quality reduction should be solved quickly. To do this, one must have basic know-how in troubleshooting and fixing printing issues. For example, getting a faint print from a high quality printer is a common problem. Fixing it can be done quickly without asking for professional assistance.

What is worst than a faulty printer is not having any clue on how to deal with it. Learn troubleshooting techniques and printer maintenance tips from this blog.

Faint Print is usually caused by improper seating of the developer assembly or toner cartridge. In this case a print drum which is Kyocera Tk-320.

To fix faint print for Kyocera FS-4000, follow the steps below.

Before anything else, make sure to turn off the printer. Unplug it and let it cool down.

Detaching and refitting the developer unit and toner cartridge procedure:

  1. Open the top cover.
  2. Open the MP tray.
  3. Lift up on the toner cartridge and the Deleveloper unit will come with it.
  4. Remove the toner cartridge and the developer unit.
  5. Check or replace the developer unit and toner cartridge.
  6. Clean the developer seat. Dusting it should be enough.
  7. Reseat all the removed parts properly.
  8. Close the MP tray and the top cover.

Are you spending so much money on printing supplies? Save as much as 50% when you switch to  compatible toner cartridges.

These steps may be able to help you fix the problem. Faint print may also occur when you run out of toner. If so, you may replace the toner cartridge with a brand new one. When looking for an inexpensive alternative, you may use compatible Tk-320 cartridge. But if problems persist, consult a technician.

You Might Also Like

No Comments

Leave a Reply