Laser Printers

Firmware Problem: What To Do When It Gets All Corrupted?

What to do when firmware gets corrupted?

When a firmware like the one loaded  into a Samsung laser printer gets corrupted, the option is have it fixed. But, the process is not really easy, diagnosing what is wrong with the driver could be extensive and takes a lot of time.

In majority of cases, replacement is the only way out, but again this is easier said than done, particularly if the printer is hooked to the local network. Depending on the office print environment, replacement of drivers to all printers hooked on the network has to be done manually. This means that driver troubleshooting must be done on every workstation, this entails a lot of work to the assigned personnel. However, there is a way out and much easier, rely on a ‘printer installer application’.

A ‘printer installer application’ is solely engineered to easily and collectively handle all driver printer issues within a fully functioning office equipment network. One unifying factor that this app offers is it can help drivers quickly and conveniently. This app is of utmost importance because if replacement of questionable printer driver becomes necessary it can be done with just a stroke or single action. With this swift action, workstation will no longer suffer and maintain productivity.

When a ‘printer installer app’ precedes all and installed before actual office work commences, it helps manage and create a fruitful environment. Firstly relying on the app, the office can select the right driver to be used in a particular workstation. This is important because workstations are created to be different from each other, each caters to different workloads. It defines the separate operating systems and architecture thus, drivers can be prevented from corrupting.

The ‘printer installer app’ loaded to a Samsung laser printer can also be used to do ‘direct ip printing’, which totally eliminates the need to have print servers. With print servers out of the way, it cuts down on mass driver failure, because each workstation is given its own queue system, instead of sharing. Each problem becomes isolated to only a few workstation and not encompassing. Besides, from experience the print server is regularly the cause of so much system failure.

Remember, an ‘ounce of prevention is better than a pound of cure’ applies even to the complicated printing environment. It becomes a direct challenge for offices to find all possible means to protect their Samsung laser printer or any other printer firmware from being corrupted.

You Might Also Like

No Comments

Leave a Reply