Monthly Archives

December 2014

Printer Troubleshooting

How to Reset Ink Levels for Epson Artisan 810?

The Epson Artisan 810 is an inkjet printer perfect for the creative people who want to exercise and unleash ideas. Moreover, users can enjoy the enhanced connectivity of the printer. This color inkjet printer is able to connect through Wi-Fi and Ethernet networks. A user can easily connect to the Epson Artisan 810 and share it with other people. Print smartly whenever and wherever as long as the printer is connected in the same network. The printer is very much capable of handling the needs in a small and home office.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

Why do users need to reset ink cartridge levels for Epson Artisan 810?
Inkjet printers consume ink in order to successfully print an image from a computer or another device to a medium. After depleting the ink load inside ink cartridges, users are bound to
replace or refill the cartridges the printer to again be productive.
Newer printers like Epson Artisan 810 include chips that keep the ink levels in check. The chips serve as maintenance counters. Every after refill or replacement of cartridges, the chip/s has to be reset for the printer to acknowledge the new toner load. Without resetting the ink levels, the printer will halt the printing process and give out an error message.

Steps to Successfully Reset Ink Cartridge Levels
1. Turn off the printer and take out the Epson Artisan 810 ink cartridge or cartridges as well as the printhead.

2. Discern if it is the combo or the multichip version of cartridges and printhead. If it is the multichip version, replace the chips. Users do not have to worry since refill kits typically come with replacement reset chip. For the combo version, push button reset button on the printhead to reset the ink level.

3. After step number two, properly seat the cartridge or cartridges to the printhead. The alignment of the cartridges is critical for the success of resetting ink levels as well as refills and replacement cartridges for inkjet printers.

4. Reinstall the printhead with the cartridges into the Epson Artisan 810. After doing so, turn on the inkjet printer then test print.

Looking for the highest quality printer consumables available at factory direct prices? Visit http://www.lasertekservices.com today for the best deals in compatible toner cartridges.

Ink Cartridge for Epson T098120 / T099120 Epson Artisan 700 710 725 730 800 810

Ink Cartridge for Epson T098120 / T099120 Epson Artisan 700 710 725 730 800 810

After following these steps, ink levels should already be reset. If problems still persist, ask for professional assistance. Should the Epson Artisan 810 run out of ink, refill or replace the cartridge with either an OEM or a compatible Epson T098120 ink cartridge. Compatible consumables are a lot less expensive than the OEM counterpart.

Printer Troubleshooting

How to Reset Ink Levels for Epson Artisan 810?

The Epson Artisan 810 is an inkjet printer perfect for the creative people who want to exercise and unleash ideas. Moreover, users can enjoy the enhanced connectivity of the printer. This color inkjet printer is able to connect through Wi-Fi and Ethernet networks. A user can easily connect to the Epson Artisan 810 and share it with other people. Print smartly whenever and wherever as long as the printer is connected in the same network. The printer is very much capable of handling the needs in a small and home office.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

Why do users need to reset ink cartridge levels for Epson Artisan 810?
Inkjet printers consume ink in order to successfully print an image from a computer or another device to a medium. After depleting the ink load inside ink cartridges, users are bound to
replace or refill the cartridges the printer to again be productive.
Newer printers like Epson Artisan 810 include chips that keep the ink levels in check. The chips serve as maintenance counters. Every after refill or replacement of cartridges, the chip/s has to be reset for the printer to acknowledge the new toner load. Without resetting the ink levels, the printer will halt the printing process and give out an error message.

Steps to Successfully Reset Ink Cartridge Levels
1. Turn off the printer and take out the Epson Artisan 810 ink cartridge or cartridges as well as the printhead.

2. Discern if it is the combo or the multichip version of cartridges and printhead. If it is the multichip version, replace the chips. Users do not have to worry since refill kits typically come with replacement reset chip. For the combo version, push button reset button on the printhead to reset the ink level.

3. After step number two, properly seat the cartridge or cartridges to the printhead. The alignment of the cartridges is critical for the success of resetting ink levels as well as refills and replacement cartridges for inkjet printers.

4. Reinstall the printhead with the cartridges into the Epson Artisan 810. After doing so, turn on the inkjet printer then test print.

Looking for the highest quality printer consumables available at factory direct prices? Visit http://www.lasertekservices.com today for the best deals in compatible toner cartridges.

Ink Cartridge for Epson T098120 / T099120 Epson Artisan 700 710 725 730 800 810

Ink Cartridge for Epson T098120 / T099120 Epson Artisan 700 710 725 730 800 810

After following these steps, ink levels should already be reset. If problems still persist, ask for professional assistance. Should the Epson Artisan 810 run out of ink, refill or replace the cartridge with either an OEM or a compatible Epson T098120 ink cartridge. Compatible consumables are a lot less expensive than the OEM counterpart.

Toner Refill

Reduce Operational Cost For Canon MF-6595 With Virgin Empty Toner Cartridges

Canon MF-6595 is a multifunction printer that can print, copy, color scan, and fax. It is a single streamlined multifunction laser platform machine that is inherently more beneficial in limited office-space environments. It can handle workgroup needs as it can be used as a network printer with efficiency and top-notch quality. This is a good solution for saving space in small and home office environments. Although the initial cost is low, operational costs can rack up in no time when using genuine Canon 106 toner cartridge. This however, can be remedied by making use of virgin empty toner cartridges.

What is a virgin empty toner cartridge?

Virgin empty toner cartridges are brand new toner cartridges that are empty but have not been refilled. These toner cartridges are not rejected and are all virgin OEM cores. Virgin empty toner cartridges have never been drilled our disassembled. Before they are sold, these cartridges visually inspected and appear to be in great shape with no cracked cases or damaged drums. Virgin empty cartridges are collected from local schools, churches & fund raisers to support cartridge recycling and promote green printing.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

Users can identify a virgin toner cartridge with its original label. For example, a virgin Canon 106 toner cartridge should have a Canon logo found on the cartridge.

How do virgin empty toner cartridges reduce operational costs?
Empty cartridges are sold at a very low price. A virgin empty Canon 106 toner cartridge and a toner refill kit
for an instance will approximately cost $5 and $16 respectively.  An OEM toner cartridge on the other hand, cost up to $220. The price difference between a virgin empty Canon 106 toner cartridge and an OEM toner cartridge has clearly been too large. In this case, consumers can save up to $199 by using virgin empty cartridges.

Canon 106 MF-6500 MF-6530 MF-6550 MF-6560 1 Pack Toner Refill

Canon 106 MF-6500 MF-6530 MF-6550 MF-6560 1 Pack Toner Refill

By using a virgin empty toner cartridge along with Canon 106 toner refill kits, users will be able to print more pages for less the cost. Instead of paying a ready to use OEM toner cartridge, consumers can opt for virgin toner cartridges to be refilled that considerably reduces printing costs.

Although empty toner cartridges are widely available in the market, only a few people recognize how these can considerably reduce operational costs. Continue printing with Canon MF-6595 for less the cost without compromising print quality. By purchasing a virgin Canon 106 toner, cartridge consumers can print for less the cost while saving the environment through recycling.

Looking for the highest quality printer consumables available at factory direct prices? Visit http://www.lasertekservices.com today for the best deals in compatible toner cartridges.

Printer Troubleshooting

Canon PIXMA iP4820: Fixing Error 6000

Canon PIXMA iP4820 Premium Inkjet Photo Printer

Canon PIXMA iP4820 Premium Inkjet Photo Printer

The Canon PIXMA iP4820 is a photo printer best for personal and home office use. It boasts Auto Duplex Print, Auto Photo Fix, Borderless Printing, Document Printing, and 2-way paper feeding. Additionally, it utilizes 5 individual Ink Tanks (Canon PGI-225BK and CLI-226 Series). However, having impressive features does not mean it will not encounter technical problems too. A flashing Error 6000 is one of the most common errors experienced with this printer.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

What does Error 6000 mean? Error 6000 means there is a problem with the Line Feed (LF). There are 3 common causes for this error: (a) The line feed is either scratched or smeared; (b) some small particles, debris or a foreign object is stuck in the LF drive; (c) or the line feed slit or sensor unit is defective.

How to resolve an Error 6000 issue? There are many solutions offered to fix various reasons for this error code:

(a)    For a scratched or smeared line feed, simply clean the LF or EJ slit film with a non-corrosive solution.
(b)    For stuck particles, debris, or foreign object in the LF drive, remove the jammed object properly.

If the abovementioned problems are non existent but the Error 6000 keeps flashing, resetting the printer might just do the trick.

1.  Unplug the printer from the outlet and let it sit for a few seconds for pause effect.
2.  Plug the power cord back and switch on printer. Press and hold the “power” button for a few seconds then press “stop” button twice. Repeat procedure one more time. This time, slowly release the “power” button and press the “stop” button four times. This should clear the persistent error message.

(c)    For a defective printer part, replace the defective component. The defective components will include one or more from these: LF / EJ slit film, LF / EJ timing sensor unit, Paper feed roller unit, Logic board and Paper feed motor. Refer to the manual for proper removal and installation of the new part. If you are wary, it is best to seek the help of a professional.

Looking for the highest quality printer consumables available at factory direct prices? Visit http://www.lasertekservices.com today for the best deals in compatible toner cartridges.

Canon PGI-225BK & CLI-226 Value Pack of 5 Ink Cartridges: 1 PGI225, 1 each

Canon PGI-225BK & CLI-226 Value Pack of 5 Ink Cartridges: 1 PGI225, 1 each

The Error 6000 on Canon PIXMA iP4820 is a problem that offers several solutions. However, the constant problem a user usually faces with this printer is the depletion of its consumables. Make sure to buy an extra Canon PGI-225BK and CLI-226 in case the ink cartridge is exhausted in the middle of a printing task.

InkJets

Can Printheads Replace Ink Cartridges for Canon SmartBase MP-370?

There has been some misconception about printheads as replacements for ink cartridge. Many have asked about the possibility of replacing an ink cartridge with a printhead. To begin with, both function differently in the printing process. Though both parts can be found on all inkjet printers, printheads and ink cartridges are not interchangeable.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

What are printheads?* A printhead is the part in a printer that assembles and holds the characters to be printed. It is also the component of an inkjet printer that systematically sprays the ink on paper creating images and texts. It is the counterpart of the photoconductive unit or the drum unit of the laser printer.

Canon BCI24 Black Ink Twin Pack OEM for Canon MP-370 MP370

Canon BCI24 Black Ink Twin Pack OEM for Canon MP-370 MP370

 

What are ink cartridges?* An ink cartridge is a replaceable component of an inkjet printer that acts as the storage and dispenser of the print consumable. Ink as the print consumable is deposited in the cartridge. Then with the help of a printhead, it is transferred to the medium which in most cases is a paper. Each ink cartridge may contain one or more partitions of ink reservoirs. Some OEMs add electronic contacts and a chip to communicate with the printer. Color Inkjet printers like Canon SmartBase MP-370 have different ink cartridges for different ink colors. Ink cartridges can be refilled after consuming the total ink load.

 

**What are the significant differences between printheads and ink cartridges?**

First significant difference is the function. Ink cartridges act as storage while printheads serve as receiver of the image from the printer then gets enough ink to create and transfer that image to the paper. Both parts have different roles in the inkjet printing process. They are not meant to replace one another.

Second significant difference is the functional life of the parts. The printhead does not need to be replaced each time the ink cartridges are replaced. Change the printhead only when the print quality deteriorates and a head cleaning fails to resolves the problem. Printheads can last up to 2 to 3 ink cartridge replacements or refills. However, this estimate may vary depending on the usage and printer maintenance.

Third significant difference is the price. Printheads are a lot less expensive than ink cartridges. Ink cartridges are typically more costly since they come with standard toner load. Some printers have a separate printhead and ink cartridge like Canon SmartBase MP-370. These kinds of printers are a lot more cost-efficient. Consumers won’t have to pay for both the cartridge and printhead every time ink cartridges are replaced.

Looking for the highest quality printer consumables available at factory direct prices? Visit http://www.lasertekservices.com today for the best deals in compatible toner cartridges.

Should the Canon SmartBase MP-370 printhead needs replacing, consumers may choose between cheaper aftermarket and the genuine OEM printhead. Cartridges and printheads may be two different parts but without one of them, printing on inkjet printer would be impossible.

Laser Printers

Does The Photoconductor Kit For Lexmark E332 Replace the Toner Cartridge?

Photoconductor kits and toner cartridges are both important parts of a laser printer. These parts serve different purposes in laser printing. These parts are not interchangeable and in the absence of one, the printer will not function. This is pretty clear. However, plenty of people still do not know their differences. Some ask which lasts longer or which has better print quality. Does the photoconductor kit replace the toner cartridges?

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

The lack of information included in most printer packages is the root of these misunderstandings. Since most OEMs focus on things like how to operate the printer, how to make use of features and basic troubleshooting, included information about printer parts are close to null. This is why people get confused as to which product to purchase in order to continue with their print jobs.

Lexmark E230 E330 E342 12A8305 Black Remanufactured Toner Cartridge

Lexmark E230 E330 E342 12A8305 Black Remanufactured Toner Cartridge

What is a toner cartridge?
A toner cartridge acts as the storage and the one that dispenses the toner in order to make copies for copiers and print pages for printers. Toner cartridges do vary for most printers. Some printers however, use the same model of toner cartridge.

Toner cartridges have shorter life span compared to the photoconductor unit. This is mainly because as pages are printed, durability of the toner cartridge is degraded. Although these can be cleaned then refilled, the quality of the printouts will eventually deteriorate. After surpassing the number of refills, current cartridge should be replaced.

 

What is a photoconductor kit?
A photo conductor kit also known as drum unit, serves as the photoconductive drum. It is the part of laser printers that takes the image from the laser. The drum picks up the toner particles from the cartridge and then transfers them onto the paper.

Some printers have the photoconductive drum and the toner storage in one cartridge. Some printers like the Lexmark E332 have a separate toner cartridge and a photoconductor kit. It depends on the OEM as to how the printer is designed. A separate photoconductive kit usually lasts a lot longer than the toner.

 

 

Conclusion
A Lexmark E332 photoconductor kit cannot be used as replacement for the toner cartridge. It is made to replace the drum unit of the printer. On the other hand, a toner cartridge is in charge of the toner supply. If the toner load is depleted, users may refill or replace it.

Is the OPC drum of your laser printer worn out? Shop for a compatible replacement now at http://www.lasertekservices.com and enjoy big savings.

The photoconductor kit and toner cartridge both have finite shelf life. If a Lexmark E332 drum unit breaks down, compatible or OEM photoconductor kit can be purchased as replacement.

Laser Printers

Kyocera FS2000 Toner Cartridge And The Benefits of EcoSys Technology

Laser printer users who have long saddled with unmanageable printing expenses can take a rest with the entry of the Kyocera FS2000 toner into the market. This development is a welcome break for users because the EcoSys technology infused into the cartridges obliges all users to rely on refilling – the use of toner refill kits instead of buying a cartridge replacement. This is a gesture that promotes user savings and environmental benefits as well.

Why is toner refilling encouraged in Kyocera FS2000 toner cartridges? Kyocera is not your average or regular toner cartridge since it can tolerate the frequent infusion from toner refill kits to sustain printing. In fact, it was designed to last long and survive several rounds of refilling just like its print drum that was crafted from Amorphous Silicon. This type of silicon is second to diamond in hardness so that the drum can survive from between 375,000 to 500,000 pages of print. Summing it up, a user may only need a few cartridge replacements up to the lifetime of the printer.

More tips and tricks to printer maintenance and how you can save on printing supplies from the Printer Encyclopedia.

Kyocera TK310 TK312 FS2000 1 Pack Toner Refill With Chip

Kyocera TK310 TK312 FS2000 1 Pack Toner Refill With Chip

What are toner refill kits? These are after market products developed by third party manufacturers precisely to refill empty Kyocera FS2000 toner cartridges. Toner particles in refill kits inhibit similar characteristics with the ecotone toner used on the OEM Kyocera toner cartridge. It is understood that the capability of the OEM toner to continuously polish and maintain the condition of the drum surface during each printing cycle is also inherent in the refill toner.

Why are toner refill kits necessary to the Kyocera FS2000 toner cartridge? The reason for this is that the cartridge is designed for longevity. Therefore, a single lifetime of 12,000 pages would not be enough to strip it of its capability. It will need several infusions of refill kits to reach its intended printing capability to match that of the other printer components – the print drum and fuser included. Thus, every time the cartridge is depleted of toner, the likely option the user has is to refill it with toner.

Will it benefit everybody? The concept behind EcoSys technology is to minimize the wanton disposal of empty cartridges that has escalated to an alarming rate of around 200 million each year across North America. This is apart from the cost benefits that are intrinsic in the use of refill kits.

Are you spending so much money on printing supplies? Save as much as 50% when you switch to compatible toner cartridges.

Kyocera TK-310 TK310 TK-312 TK312 FS-2000 Remanufactured Toner Cartridge

Kyocera TK-310 TK310 TK-312 TK312 FS-2000 Remanufactured Toner Cartridge

Remember, your Kyocera FS2000 toner cartridge is really designed for refilling. Each time it runs out of toner, do not hesitate to conduct refills using a Kyocera FS2000 toner refill kit and never even consider buying a replacement cartridge.